HICLOVER.CN

Blog

  • Small Medical Incinerator TS20

    Small Medical Incinerator TS20

    HICLOVER, Nanjing Clover Medical Technology Co.,Ltd, supply system solutions for medical environmental protection, animal and pet cremation engineering, other municipal solid waste incineration project.

    We supply single combustion chamber, double combustion chambers, three combustion chambers and multi-combustion chambers waste incinerators for laboratory, clinic, hospital, medical center, hygiene clinical waste destruction with medical disposable, biological waste, medical plastic waste, hazardous waste, red bag waste, needle disposal, gauze and bandages, sealed sharp containers, pathological waste, trace-chemotherapeutic wastes, etc.

    Items/Model TS20(PLC)
    Burn Rate (Average) 20 kg/hour
    Feed Capacity(Average) 40kg
    Control Mode PLC
    Combustion Chamber 210L
    Internal Dimensions 65x65x50cm
    Secondary Chamber 110L
    Smoke Filter Chamber Yes
    Feed Mode Manual
    Voltage 220V
    Power 0.5Kw
    Oil Consumption (kg/hour) 7.8–16.3
    Gas Consumption (m3/hour) 8–15.7
    Temperature Monitor Yes
    Temperature Protection Yes
    Oil Tank 100L
    Feed Door 45x40cm
    Chimney 3Meter
    Chimney Type Stainless Steel
    1st. Chamber Temperature 800℃–1000℃
    2nd. Chamber Temperature 1000℃-1200℃
    Residency Time 2.0 Sec.
    Gross Weight 2200kg
    External Dimensions 160x110x130cm
  • Small Medical Incinerator TS10

    Small Medical Incinerator TS10

    Items/Model TS10(PLC)
    Burn Rate (Average) 10 kg/hour
    Feed Capacity(Average) 20kg
    Control Mode PLC
    Combustion Chamber 100L
    Internal Dimensions 50x50x40cm
    Secondary Chamber 50L
    Smoke Filter Chamber Yes
    Feed Mode Manual
    Voltage 220V
    Power 0.5Kw
    Oil Consumption (kg/hour) 5.4–12.6
    Gas Consumption (m3/hour) 6.2–11.4
    Temperature Monitor Yes
    Temperature Protection Yes
    Oil Tank 100L
    Feed Door 30x30cm
    Chimney 3Meter
    Chimney Type Stainless Steel
    1st. Chamber Temperature 800℃–1000℃
    2nd. Chamber Temperature 1000℃-1200℃
    Residency Time 2.0 Sec.
    Gross Weight 1500kg
    External Dimensions 140x90x120cm

     

    TS model PLC incinerator is latest design for waste treatment, include medical waste, animal cremation and other solid waste. This equipment quality structural for kinds of site, like hospital, environmental department, animal cremation agencies, etc. CLOVER Incinerator supply updated models with dual combustion chamber and smoke filter chamber with refractory lines, and the combustion chamber temperature up to 1200 deg C.

    Items Specification
    Model TS10(PLC) / TS20(PLC) / TS30(PLC) / TS50(PLC) / TS100(PLC)
    Main Product List Double Combustion Chamber
    Smoke Filter Chamber
    PLC Mode Control Case
    Stainless Steel Chimney
    Italy oil/gas burner: 02 units
    Oil Tank (if oil fuel)
  • HICLOVER Made Waste Incinerators

    HICLOVER Made Waste Incinerators

    HICLOVER, Nanjing Clover Medical Technology Co.,Ltd, supply system solutions for medical environmental protection, animal and pet cremation engineering, other municipal solid waste incineration project.

    We supply single combustion chamber, double combustion chambers, three combustion chambers and multi-combustion chambers waste incinerators for laboratory, clinic, hospital, medical center, hygiene clinical waste destruction with medical disposable, biological waste, medical plastic waste, hazardous waste, red bag waste, needle disposal, gauze and bandages, sealed sharp containers, pathological waste, trace-chemotherapeutic wastes, etc.

          

    Our range of incinerators cater for small to large scale animal cremation related businesses, such as poultry farms, cattle farms, sheep farms, pig farms, stables, kennels, testing laboratory, catteries, pet crematoriums.

    The incinerator burn waste in primary combustion chamber and burn the smoke from primary combustion chamber again to make sure environmentally friendly with no black smoke, smelless, reduce pathogenic bacteria infection.

  • TECHNICAL SPECIFICATIONS FOR NAMAPA HOSPITAL,INCINERATOR 20KG

    TECHNICAL SPECIFICATIONS FOR NAMAPA HOSPITAL,INCINERATOR 20KG

    INCINERATOR 20KG
    General Specifications
    6mm plate steel sheel construction
    11cm 1400 º C Refractory L iner
    Temperature controlled Burners
    Secondary combustion Burners
    Interlock Switch on Load Doors
    Separate Ash Door
    One Second secondary Residence @ 1000 º C
    400 ° C Silicone Based Paint Finish.
    Alloy Temperature Sensor
    Factory wired and tested
    Capacity-20 kg / hr
    Primary Chamber-1607 L
    Hearth Area-1:36 sq. m
    Secondary Chamber-694 L
    Primary Burner (oil)-420,000 btu
    Secondary Burner (oil)-900,000 btu
    secondary Combustion-1/6 hp
    Exhaust Stack-46cm x 6m
    Electrical Service-220/50
    Weight System-5.700 kg
    Dimension “D”-152cm
    Load Port Height- 60x 60 cm
    Ash Port Height -36 x 36 cm
    Electrically operated incinerator
    In a simple design with a metal steel drum electric. including:
     A cage for receipt of biomedical waste;
     A combustion chamber with fireplace with a filter to retain ashes;
     A cover;
     An air supply;
    A turbine  allowing the supply of the air.
    Combustion temperature: 1800 ° C. Compliance with European standards.
    Comes with all necessary accessories
  • Large Incinerator Industrial Unit – Waste Types

    Large Incinerator Industrial Unit – Waste Types

    Large Incinerator Industrial Unit – Waste Types                         
    Approx Burn Rate of 1000 KG/Hour – 18 hours/Day. Cap 7 to 9 Cbm 
    Auto Continuous Feeder*
    Control Panel Stand
    Fuel Tank
    Pollution Control & Monitoring System
    Service Packs
    Static Loading Mechanism*
    Venturi Scrubber
    Quantity 1 set
    Capacity 200 kg/hr
    Loading capacity 400-500kg/batch
    Overall Width 8,500mm
    Overall Length 10,000mm
    Overall Height 3,450mm
    Fuel Type Diesel
    Overall Fuel Consumption
    Exhaust Smokeless
    Odorless
    Quantity 2 sets
    Capacity (200 kg/hr)/set  
    Diameter 1,912mm
    Height 2,962mm
    Furnace Volume 5m3/Set
    Furnace Exit Temperature 500-1000 deg C.
    External Material Steel Plate 6t, channel
    Internal Material Fire Proof, CT-160
    Insulation Ceramic Wool 25T, Insulation 50T
    Access Hole/Door
    Burner 1 set
    80,000 kcal/hr capacity
    Electrica automatic ignition
    Fron and Rear range of flame
    ON/OFF operation
    Flame detection devise
    Fuel cut off devise
    Diese burner
    Burner Made/Type
    Quantity 1 set
    Diameter 900mm
    Length 1500mm
    External Material Stainless Steel 304-8t
    Internal Material Fire Proof, CT-160
    Insulation Ceramic Wool 25T, Insulation 50T
    Auxiliary Door Locking Devise
    Access Hole
    Quantity 1 set
    Diameter 1500mm
    Height 2,800mm
    Exit Temperature 850-1000 deg c.
    External Material Stainless Steel 304-8t
    Internal Material Fire Proof, CT-160
    Insulation Ceramic Wool 25T, Insulation 50T
    Casing Surface temperature 120 deg c.
    Burner 1 set
    80,000 kcal/hr capacity
    Electrica automatic ignition
    Fron and Rear range of flame
    ON/OFF operation
    Flame detection devise
    Fuel cut off devise
    Diese burner
    Burner Made/Type
    Quantity 1 set
    Capacity 1000 kg/hr…Steam